UtilityNest

A3 paper size: mm, inches and pixels

A3 is 297 x 420 mm (11.69 x 16.54 in), exactly two A4 sheets side by side. At 300 DPI it is 3508 x 4961 pixels.

297 x 420 mm11.69 x 16.54 in Checked 2026-11-08
A3297 x 420 mmA4210 x 297 mmUS Letter215.9 x 279.4 mm
Drawn to scale

Every measurement

Millimeters297 x 420 mm
Centimeters29.7 x 42 cm
Inches11.69 x 16.54 in
Pixels at 72 DPI842 x 1,191 px
Pixels at 96 DPI1,123 x 1,587 px
Pixels at 150 DPI1,754 x 2,480 px
Pixels at 300 DPI3,508 x 4,961 px
Aspect ratio1:1.41

Turned sideways (landscape), swap the two numbers.

Used for

  • Posters, charts and diagrams that need more room than A4
  • Architecture and engineering drawings
  • Spreads in magazines and printed booklets folded to A4

A3 in one sentence: two A4 pages joined on the long edge

ISO 216 defines A3 as A2 cut in half, which makes it exactly twice the area of A4 with the same 1 to square root of 2 shape. That shape is the useful part. An A4 document enlarged on a copier to A3 grows by about 141 percent in each direction and fills the sheet edge to edge; an A3 drawing reduced to A4 shrinks to about 71 percent and still fits perfectly.

A3 is the standard sheet for small posters, site plans, wide spreadsheets, and the open spread of an A4 magazine or report. Many office copiers in A4 countries take A3 in a second tray. Most home inkjets and small lasers do not, which is the main practical problem people run into.

A3 versus 11 x 17 inch Tabloid

In North America the nearest sheet is Tabloid, 11 x 17 inches (279.4 x 431.8 mm), also called ANSI B in drawing standards. The two are easy to confuse but have different shapes. A3 is about 18 mm wider than Tabloid and about 12 mm shorter. A file made for one and printed on the other at 100 percent will either lose its sides or its top and bottom, so choose Fit when you cross over. Fitting A3 onto Tabloid scales it to about 94 percent; fitting Tabloid onto A3 scales it to about 97 percent.

Three ways to get A3 output without an A3 printer

  • Tile it: split the image across several A4 sheets, trim the overlaps and tape them together. This keeps the full size and works on any printer. Our test below shows what that looks like in practice.
  • Shrink it: print the A3 file on one A4 sheet with Fit. Text at 12 point becomes about 8.5 point, still readable for most documents but tight for footnotes.
  • Send it out: copy shops and office copiers usually print A3 from a PDF. Give them a PDF whose page size really is A3 (use /pdf-page-size if it is not) and ask for Actual size.

Getting the pixels right for a poster

For close viewing, such as a notice board, 300 DPI means 3508 x 4961 pixels, about 17 megapixels. Posters seen from a meter or more away look fine at 150 DPI, 1754 x 2480 pixels, which a modern phone photo easily exceeds. What matters more than the number is the source: enlarging a 1000 pixel wide web image to A3 gives about 85 pixels per inch, which looks visibly blocky up close.

If a print shop asks for bleed, add 3 mm on every side, so the file becomes 303 x 426 mm, and keep text at least 5 mm inside the trim line.

Our test: a 300 DPI A3 poster printed on A4 sheets

We generated a 3508 x 4961 pixel JPG (4.9 MB), the pixel size of A3 at 300 DPI, and loaded it into /print-image-multiple-pages in headless Chromium with 5 mm overlap and trim marks on. We tried two layouts.

A4 landscape, 1 column3 sheets, 1 across x 3 downAssembled 27.7 x 39.2 cm, 322 pixels per inch
A4 portrait, 2 columns4 sheets, 2 across x 2 downAssembled 37.5 x 53.0 cm, 238 pixels per inch
Output PDF4.9 MB JPG in5.7 MB PDF out, ready in about 1.3 to 1.5 s

The three-sheet layout comes out about 2 cm narrower and 3 cm shorter than a true A3 sheet, because each A4 page loses its unprintable border and the 5 mm overlaps. If you need the exact A3 size, print the four-sheet layout and trim it down, or use a copier that takes A3. Print at 100 percent or Actual size, or the tiles will not line up.

Error messages and what to do

Printer offers only Letter, A4 and smaller sizes

The printer has no A3 tray, so the driver hides the size.

Tile the image across A4 sheets with /print-image-multiple-pages, or print the file shrunk to A4.

Tiles do not line up when taped together

The PDF was printed with Fit or Shrink, so each tile was scaled a different amount from the overlap marks.

Reprint at Actual size or 100 percent, then trim along the marks.

Copy shop says the file is not A3

The PDF page box is a different size, for example Tabloid or a scanner default, even though it looks right on screen.

Convert the page size to A3 with /pdf-page-size before sending it.

Questions people ask

Is A3 the same as 11 x 17?

No. 11 x 17 inch Tabloid is narrower and taller. Both work for small posters, but a layout made for one needs Fit to print on the other.

How many A4 pages fit on A3?

Two, side by side, at full size. That is why A3 is used for printing the open spread of an A4 booklet.

Can I print A3 on a printer that says it supports up to A4?

Not on one sheet. Tile it across two to four A4 pages, or reduce it to fit.

Also checked for this guide

Make your file this size

Each button opens the tool already set to this size. Files are processed in your browser.

Good to know

  • Many office printers cannot feed A3. Print an A3 poster on two A4 sheets with the multi-page print tool instead.
  • A3 is close to US Tabloid (11 x 17 in): about 1.8 cm wider and 1.2 cm shorter.
  • Scaling A3 down to A4 shrinks everything to 71 percent, which keeps text readable for most documents.

Sources

More paper sizes