UtilityNest

Business card size: inches, mm and pixels

The standard US and Canadian business card is 3.5 x 2 inches (88.9 x 50.8 mm). With a 1/8 inch bleed on every side the print file is 3.75 x 2.25 inches, or 1125 x 675 pixels at 300 DPI.

3.5 x 2 in88.9 x 50.8 mm Checked 2026-11-08
US business card88.9 x 50.8 mmBank card85.6 x 54 mmA6105 x 148 mm
Drawn to scale

Every measurement

Millimeters88.9 x 50.8 mm
Centimeters8.89 x 5.08 cm
Inches3.5 x 2 in
Pixels at 72 DPI252 x 144 px
Pixels at 96 DPI336 x 192 px
Pixels at 150 DPI525 x 300 px
Pixels at 300 DPI1,050 x 600 px
Aspect ratio7:4

Turned sideways (landscape), swap the two numbers.

Used for

  • Business and contact cards in the US and Canada
  • Loyalty cards and appointment cards
  • Small labels and tags

The details

Trim size88.9 x 50.8 mm3.5 x 2 in
With 1/8 in bleed1125 x 675 px at 300 DPI3.75 x 2.25 in
European cardFor comparison85 x 55 mm

There is no world standard for business cards

Unlike paper sizes, business cards are not set by ISO. The 3.5 x 2 inch card (88.9 x 50.8 mm) is a North American convention that printers, templates and government brand guides all follow; a Minnesota state agency's published card spec, for example, lists its size as 3.5 inches x 2 inches with bleed, in four-color CMYK. Other regions use their own sizes, so a design sent abroad may need adjusting.

The card people most often compare it with is a payment card. Bank and ID cards follow ISO/IEC 7810 format ID-1, 85.60 x 53.98 mm. A US business card is about 3 mm longer and 3 mm narrower than that, so cardholders made for one size do not always fit the other snugly.

The three boxes in every card file

A print-ready card has three nested rectangles, and most rejected files get one of them wrong.

  • Bleed box: 3.75 x 2.25 inches. Backgrounds and photos run all the way to this edge so that no white sliver appears if the cutter drifts. At 300 DPI that is 1125 x 675 pixels.
  • Trim box: 3.5 x 2 inches, where the card is cut. 1050 x 600 pixels at 300 DPI.
  • Safe box: 3.25 x 1.75 inches, 1/8 inch inside the trim. Keep names, phone numbers and logos inside it. 975 x 525 pixels at 300 DPI.
  • On a 1125 x 675 pixel canvas, that means text should stay at least 75 pixels from every edge.

Printing cards yourself

Ten cards fit on one Letter or A4 sheet in two columns of five: the grid is 7 x 10 inches, which leaves room for the printer's margins on either sheet. Remove the bleed for home printing and butt the cards together, so one cut separates two cards. Card stock heavier than the printer's rated weight jams or smears, so check the printer's media list first and feed it through the manual tray.

Colors look different on paper than on screen. If a print shop asks for CMYK, convert in your design app and check that deep blues and bright greens have not dulled; a pure RGB file is often converted automatically, with less predictable results.

File formats that print well

A PDF with fonts embedded is the safest choice for print shops, because text stays sharp at any resolution. If you only have an image, PNG keeps text edges crisp; a high-quality JPG is fine for photo-heavy designs. Avoid screenshots of a design app; they are usually 72 to 96 DPI, about a third of what a sharp card needs.

Our test: cropping a design to a print-ready card with bleed

We generated a 1500 x 1000 pixel PNG design (3.16 MB, gradients with noise, so harder to compress than a flat logo) and opened /crop-image from this page's button, which presets 1125 x 675 pixels, the 3.75 x 2.25 inch bleed size at 300 DPI. Headless Chromium, format left as original.

Shape1500 x 1000 px (3:2)1125 x 675 px (5:3)
Area keptFull image1500 x 900 px, 100 px removed top and bottom combined
File size3.16 MB PNG1.84 MB PNG
TimeAbout 0.25 s

Because a card is wider than 3:2, the crop takes height, not width. Move the crop box before saving if something important sits near the top or bottom. The output has the exact bleed size, but remember that the outer 37.5 pixels on each side will be cut off, and text should stay another 37.5 pixels inside that.

Error messages and what to do

Print shop says "No bleed" or "Low resolution"

The file was made at trim size (1050 x 600 px) or exported from a screenshot.

Rebuild the canvas at 1125 x 675 pixels or 3.75 x 2.25 inches, and extend the background to the edge.

White line along one edge of the printed cards

The background stopped at the trim line, and the cutter was slightly off.

Extend the background color or image to the full bleed edge.

Phone number cut off

Text sat inside the bleed or too close to the trim.

Keep all text inside the 3.25 x 1.75 inch safe area.

Questions people ask

Is a business card the same size as a credit card?

Close, not the same. A credit card is 85.60 x 53.98 mm under ISO/IEC 7810; a US business card is 88.9 x 50.8 mm.

What DPI should a business card be?

300 DPI is the usual target for print. That is 1050 x 600 pixels at trim size, 1125 x 675 with bleed.

Can I print cards on regular paper?

You can, but thin copy paper feels flimsy. Card stock that your printer lists as supported gives a much better result.

Also checked for this guide

Make your file this size

Each button opens the tool already set to this size. Files are processed in your browser.

Good to know

  • Printers usually ask for bleed: extend the background 1/8 inch (3 mm) past the trim line.
  • Keep text at least 1/8 inch inside the trim line so nothing is cut off.
  • European cards are 85 x 55 mm, so a US design needs adjusting before printing there.

Sources

More paper sizes