How to use QR Code Scanner
- 1Drop a screenshot or photo that contains the code, or click to choose a PNG or JPG. To use a webcam or phone camera instead, press Scan with camera and allow access.
- 2The content appears with a label such as Web link, Wi-Fi network, Contact card, Email address, Phone number, Calendar event, Location, Product number or Text, plus the code type.
- 3For a Wi-Fi code, the network name, password and security type appear as separate lines. For a contact card, the name, phone, email and company are listed.
- 4Press Copy to copy the raw content. For links, read the address first, then press Open link if you trust it.
When a desktop scanner helps
Phones are great at scanning codes in the real world and clumsy at scanning codes that are already on the phone or on a computer screen. Someone sends a screenshot of a Wi-Fi code from the office, a PDF ticket contains a QR code you want to read on your laptop, a two-factor setup page shows a code on the same device you would scan it with, or a photo of a poster from last week holds a link you now need. Dropping the image here reads it without a second device. It is also a safe way to inspect a code before you open it: you see the full text, not just a page that loads instantly.
What the scanner reads
QR codes are read in every modern browser. Where the browser has a built-in barcode detector, as Chrome does on Android and Mac, the page uses it first, and it also reads common 1D barcodes such as EAN-13, UPC, Code 128, Code 39, ITF and Codabar, plus Data Matrix, PDF417 and Aztec codes. Where there is no built-in detector, a decoder on the page reads QR codes only, and it tries the image at full size and then at smaller sizes, which helps with large photos of screens and posters. It also tries inverted colours, so a light code on a dark background works.
With the camera, the page checks a frame a few times per second, stops the camera as soon as a code is found and shows the result. The camera also stops when you press Stop camera or leave the page.
What happened when we tested it
A 600-pixel screenshot of a QR code holding a web address was decoded in about 0.4 seconds and labelled Web link. To imitate a phone photo of a poster, we placed the same code on a 3000 by 2250 pixel textured background, rotated it 9 degrees, blurred it and sprinkled it with noise, then saved it as an 810 KB JPEG. It was decoded in about 1.3 seconds with the full address intact.
A Wi-Fi code for a network called Cafe Guest 5G whose password contained an escaped semicolon was shown as three separate lines: the network, the password latte;2026 with the escape character removed, and WPA security. We also dropped an EAN-13 barcode image made with our Barcode Generator. In headless Chromium on a Linux test server, which has no built-in barcode detector, it was not found, which is the expected result there; on a browser with the detector, 1D barcodes are read.
Safety before you open a link
Scam QR codes are a real problem: stickers placed over genuine codes on parking meters, restaurant tables and posters send people to lookalike payment or login pages. Before pressing Open link, read the domain, the part between https:// and the next slash. Watch for misspellings, extra words and unusual endings, and be careful with short links that hide the real destination. A genuine payment page will never need you to scan a code to enter your card number for a parking fine. Opened links start in a new tab without passing on this page.
When nothing is found
Blurry, tiny or partially cut codes are the usual cause. Crop the screenshot so the code fills most of the picture, or take the photo again closer, straight on and in good light. A code photographed at a steep angle or with a glare spot across it often fails. Codes with a logo covering too much of the middle may be unreadable to any scanner. If the code is a 1D barcode and you are on a browser without a built-in detector, try Chrome on an Android phone.
Frequently asked questions
Does my photo get uploaded?
No. The image is decoded in your browser and never leaves your device. Camera frames are processed the same way.
Why does the camera not open?
Your browser needs permission to use the camera, and the page must be opened over https. If you blocked it once, allow it again in the site settings, or scan a saved photo instead.
Can it read several codes in one picture?
The built-in detector can return more than one code and each is shown as a separate result. The fallback decoder reads one QR code per picture, so crop to the code you want.
Can I see the Wi-Fi password from a code?
Yes, if the code contains it. Wi-Fi codes store the network name and password as plain text, which is why you should only share them with people you would give the password to.

